MX-5000 ADVANCED FEATURES

MX-5010, MX-5020, MX-5050, MX-5041, MX-5051

Ambient Operating Temperature:

10- 40°C (50°F - 104°F)

Maximum Enclosure Temperature:

55°C (131°F)

Input Line Voltage:

100- 240 VAC, grounded circuit

Input Line Frequency:

50/60 Hz

Power Consumption:

125 Watts

Output Power Maximum:

80 Watts max. Per channel at 22°C

Output Frequency:

13.56 MHzC

Power Cord 3-Wire:

183cm (18/3") SJT

Dimensions w x d x h:

12.1cm x 13.0cm x 23.5cm
(4.8" x 5.1" x 9.3")

Certification / Marking:

cTUVus, CE

Tip-to-Ground Potential:

< 2mV

Tip-to-Ground Resistance:

< 2 ohms

Idle Temperature Stability:

± 1.1°C (2°F) in still air

Hand-piece Cable Length:

L=122cm (48"), burn resistant, ESD safe

Hand-piece Connector:

F connector

Workstand Dimensions w x dx h:

8.6cm x 19.1cm x 8.3cm (3.4" x 7.5" x 3.3")

Weight of the power supply:

7.4 lbs (3.35 kg)

Weight of the workstand:

1.05 lbs (.476 kg)

MICRO FINE TIPS

MICROFINE REWORK TIP

The Microfine rework tip cartridge series is designed for reworking 0201 and 0402 or microfine components in tight spaces with the help of a microscope. This series includes tips that can be used to remove 0402 and 0201 components from the topside approach or can also be used for multi-lead drag soldering on micro PLCC and QFP components with access problems. Depending on your.

	SMTC-X171 Use to remove 0201 and 0402 components from a "topside" angle. This design increases microscope viewing when reworking/removing micro chip capacitors/components.
	SMTC-X172 Designed for fine drag soldering and point-to-point soldering. This tip increases access between components and allows for lead to lead or solder bridge clean-up.
	SMTC-X174 Long reach micro hoof tip designed with a smaller surface area than the mini-hoof for optimal drag soldering of components in tight spots.
	STTC-X90 Microfine tip designed for soldering and touch-up of micro components such as 0201s and 0402s.

500 series x=5 600 series x=0 700 series x=1 800 series x=8