MX-5000 ADVANCED FEATURES

MX-5010, MX-5020, MX-5050, MX-5041, MX-5051

Ambient Operating Temperature:

10- 40°C (50°F - 104°F)

Maximum Enclosure Temperature:

55°C (131°F)

Input Line Voltage:

100- 240 VAC, grounded circuit

Input Line Frequency:

50/60 Hz

Power Consumption:

125 Watts

Output Power Maximum:

80 Watts max. Per channel at 22°C

Output Frequency:

13.56 MHzC

Power Cord 3-Wire:

183cm (18/3") SJT

Dimensions w x d x h:

12.1cm x 13.0cm x 23.5cm
(4.8" x 5.1" x 9.3")

Certification / Marking:

cTUVus, CE

Tip-to-Ground Potential:

< 2mV

Tip-to-Ground Resistance:

< 2 ohms

Idle Temperature Stability:

± 1.1°C (2°F) in still air

Hand-piece Cable Length:

L=122cm (48"), burn resistant, ESD safe

Hand-piece Connector:

F connector

Workstand Dimensions w x dx h:

8.6cm x 19.1cm x 8.3cm (3.4" x 7.5" x 3.3")

Weight of the power supply:

7.4 lbs (3.35 kg)

Weight of the workstand:

1.05 lbs (.476 kg)

MOST POPULAR STANDARD RECOMMENDED TIP CARTRIDGES

These cartridges are Metcal's most popular. Owning these tips will help you to complete almost every soldering task

	STTC-X36* Chisel 30° .10˜(2.5mm)
	STTC-X37* Chisel 30° .07˜(1.78mm)
For a wide variety of tasks. If you are choosing the first tip for your Metcal system, the STTC-037 is ideal.
	STTC-X38* Chisel 30° .06˜ (1.5mm)
A finer version of the STTC-037. Ideal for medium to light through-hole and general surface mount touch-up.
	STTC-X25 Chisel 30° .04˜ (1.0mm)
Good for a variety of light soldering tasks. Looking for a surface mount touch-up tip? The STTC-025 should be your first choice.
	STTC-X07 Conical Sharp .04˜ (1.0mm)
General-purpose SMT and through-hole tip when access is limited.
	STTC-X22 Conical Sharp .016˜ (0.4mm)
Sharp tip cartridges for soldering SMT components or fine wire applications (not for general through-hole tasks).
	STTC-X06 Conical Sharp .016˜ (0.4mm)
For limited access SMT rework.
	STTC-X40 Sharp Bent 30° .032˜ (0.8mm)
Tip for soldering SMT components. The bend makes it much easier to work on small circuits and PLCCs.
	STTC-X45 Bevel 60° .016˜ (0.4mm)
An extended length fine tip for surface mount or fine wire applications (not for general through-hole tasks).

Other Standard Cartridges
	STTC-X17* Extra Large Chisel .20˜(5.0mm)
	STTC-X65 Large Chisel .20˜ (5.0mm)
	STTC-X20 Long Reach Chisel 12° .15˜ (3.8mm)
	STTC-X03* Chisel 90° .12˜ (3.0mm)
	STTC-X13 Chisel 90° .12˜ (3.0mm)
	STTC-X33 Chisel 90° .10˜ (2.5mm)
	STTC-X04 Chisel 90° .07˜ (1.78mm)
	STTC-X42 Long Reach Chisel 60° .07˜(1.78mm)
	STTC-X98 Chisel Bent 30° .07˜ (1.78mm)
	STTC-X99 Chisel Bent 30° .06˜ (1.5mm)
	STTC-X41 Chisel 30° .05˜ (1.3mm)
	STTC-X83 Conical Grooved .08˜ (2.0mm)
	STTC-X32 Conical Sharp .07˜ (1.78mm)
	STTC-X02 Conical Sharp .07˜(1.78mm)
	STTC-X01 Conical Sharp .04˜ (1.0mm)
	STTC-X31 Conical Sharp .04˜ (1.0mm)
	STTC-X43 Conical Sharp .02˜ (0.5mm)
	STTC-X12 Conical .08˜ (2.03mm)
	STTC-X11 Conical .02˜ (0.5mm)
	STTC-X16 Conical .02˜ (0.5mm)
	STTC-X44 Sharp Bent 30° .02˜ (0.5mm)
	STTC-X26 Sharp Bent 30° .016˜ (0.4mm)
	STTC-X14 Bevel 45° .08˜ (2.03mm)
	STTC-X35 Bevel 30° .07˜ (1.78mm)
	STTC-X47 Bevel 60° .07˜ (1.78mm)
	STTC-X05 Bevel 30° .07˜ (1.78mm)

500 series x=5 (for temperature sensitive applications), 600 series x=0 (for temperature sensitive applications), 700 series x=1 (for most standard applications), 800 series x=8 (for ceramic and high thermal demand applications), when followed by an *

SPECIALTY CARTRIDGES

Specialty cartridges are more expensive than Metcal's standard cartridges. If you think that you need a specialty cartridge, you may want to try a standard cartridge first.

Specialty cartridges Models
	STTC-X15 Bevel 30° .05˜ (1.3mm)
	STTC-X24 Bevel 30° .04˜ (1.0mm)
	STTC-X97 Groved Semi-Rigid Coax
	STTC-X46 Long Reach Bevel 60° .04˜ (1.0mm)
	STTC-X70 Heat Staking .19˜(4.8mm)

CARTRIDGES PART NUMBER CODE SYSTEM
Type                                                  Temperature designation                                                    Geometry
STTC -                                                                      x                                                                                36
Cartridge Series		500	600	700	800
		Temperature Designations where x =
STTC		5	0	1	8
SMTC		5	0	1	8
UFTC		n/a	n/a	7	n/a
PTTC		n/a	6	7	8
SDTC		n/a	0	7*	8

Where * shown = 1 n/a = not applicable