MX-5000 ADVANCED FEATURES

Ambient Operating Temperature:

10- 40°C (50°F - 104°F)

Maximum Enclosure Temperature:

55°C (131°F)

Input Line Voltage:

100- 240 VAC, grounded circuit

Input Line Frequency:

50/60 Hz

Power Consumption:

125 Watts

Output Power Maximum:

80 Watts max. Per channel at 22°C

Output Frequency:

13.56 MHzC

Power Cord 3-Wire:

183cm (18/3") SJT

Dimensions w x d x h:

12.1cm x 13.0cm x 23.5cm
(4.8" x 5.1" x 9.3")

Certification / Marking:

cTUVus, CE

Tip-to-Ground Potential:

< 2mV

Tip-to-Ground Resistance:

< 2 ohms

Idle Temperature Stability:

± 1.1°C (2°F) in still air

Hand-piece Cable Length:

L=122cm (48"), burn resistant, ESD safe

Hand-piece Connector:

F connector

Workstand Dimensions w x dx h:

8.6cm x 19.1cm x 8.3cm (3.4" x 7.5" x 3.3")

Weight of the power supply:

7.4 lbs (3.35 kg)

Weight of the workstand:

1.05 lbs (.476 kg)

UFTC ULTRAFINE™ TIP CARTRIDGES FOR USE WITH THE METCAL ULTRAFINE HAND-PIECE (MX-H2-UF)

The new range of UFTC cartridges feature tip geometries of 0.2 mm (.0078") to 1.2 mm(.047"). With their relatively small geometries and low mass, as compared to the STTC series, these are suited for low-mass or small part soldering.

UFTC are available in 700 series only.

Conical	Chisel

	UFTC-7CN01 UltraFine Tip Cartridge, Conical 0.13mm x 5.1mm (0.005" x 0.2")
	UFTC-7CN02 UltraFine Tip Cartridge, Conical 0.2mm x 5mm (0.01" x 0.2")
	UFTC-7CN04 UltraFine Tip Cartridge, Conical 0.4mm x 5mm (0.02" x 0.2")
	UFTC-7CNL04 UltraFine Tip Cartridge, Conical, Long 0.4mm x 9mm (0.02" x 0.31")
	UFTC-7CNB02 UltraFine Tip Cartridge, Conical, Bent 0.2mm x 5.5mm (0.01" x 0.22")
	UFTC-7CNB04 UltraFine Tip Cartridge, Conical, Bent 0.4mm x 5.5mm (0.02" x 0.22")
	UFTC-7CH06 UltraFine Tip Cartridge, Chisel 0.6mm x 5.1mm (0.024" x 0.2")
	UFTC-7CH08 UltraFine Tip Cartridge, Chisel 0.8mm x 5.1mm (0.03" x 0.2")
	UFTC-7CH12 UltraFine Tip Cartridge, Chisel 1.2mm x 5mm (0.05" x 0.2")
	UFTC-7CHL06 UltraFine Tip Cartridge, Chisel, Long 0.6mm x 9mm (0.024" x 0.35")
	UFTC-7CHL08 UltraFine Tip Cartridge, Chisel, Long 0.8mm x 9mm (0.03" x 0.35")
	UFTC-7DRH408 UltraFine Tip Cartridge, Hoof, Micro 0.8mm x 5.1mm (0.03" x 0.2")
	UFTC-7DRH412 UltraFine Tip Cartridge, Hoof, Micro 1.2mm x 5.1mm (0.048" x 0.2")